8. Remote Access

8. Remote Access

REMOTE ACCESS

The First Wave system is equipped with a remote access feature that allows operators to log on remotely and monitor the system's operation. This feature also includes email notifications to alert operators of any system shutdowns or alarms. To enable remote access, the owner needs to provide a public static IP address and an email server.

Additionally, LWR offers the option of including a cellular modem as part of the equipment, which allows for remote access even without a fixed internet connection.

To remotely connect to the system:

  1. Set up a static IP address provided by the owner.
  2. Ensure you have an internet connection.
  3. Run a VPN client (such as VPN Viewer or TightVNC Viewer).
  4. Enter the IP address into the client software (xxx.xxx.xxx.xxx).
  5. Use the last four digits of the equipment serial number as the password.

Please note that secure and reliable internet connectivity is essential for successful remote access.



    • Related Articles

    • 1. Touch Screen Operation

      TOUCH SCREEN OPERATION The system control panel features an operator display that allows you to control and navigate the system using the touchscreen interface. To operate the touch screen: 1. NAVIGATION: To switch between different screens, press ...

    • Appendix C: System Initial Startup

      WARNING: Before starting up the system, ensure that all isolation valves are fully open and all vessel drains are fully closed. Failure to do so may result in improper system operation. 1. SYSTEM STARTUP FIRST WAVE SPROUT/10/40/85: V/P/G/SP-XXX-1 ...

    • 5. Screw Press Setup and Operation

      SCREW PRESS When operating the screw press, adjustments may be necessary to achieve the desired moisture content in the solids. The moisture content can be controlled by adjusting the pressure at the outlet of the screw press. Here are some ...

    • APENDIX A: THE POLYFAST SYSTEM

      LWR’s PolyFAST unit is specifically designed to automatically prepare a 0.5% concentration of grō17 polymer, ensuring smooth system operation with minimal supervision or operator intervention. It is essential to calibrate the unit during the initial ...

    • 4. Microscreen Setup and Operation

      MICROSCREEN Microscreen Setup Proper setup of the Microscreen involves adjusting two devices to ensure effective draining of solids through the screen surface. These devices are the floc tank adjustment and the screen angle adjustment. FLOC TANK ...