3. CHEMISTRY SETTING AND ADJUSTMENT

3. CHEMISTRY SETTING AND ADJUSTMENT

GOALS OF CHEMICAL TREATMENT

 

Microscreen filtrate TSS

Size of flocs on microscreen

Strength of flocs on microscreen

Bag filter dp alarm

Goals

<1.5% of Manure TSS

Large

Strong

Less than once every 24 hours


For more information on Microscreen chemistry adjustment, refer to the “CHEMISTRY SETTING AND ADJUSTMENT” section of the First Wave Operations Manual.


RO Antiscalant

Dosage Rate (ppm)

PTP100 plus

5

    • Related Articles

    • 3. Chemistry Setting Adjustment

      CHEMISTRY SETTING AND ADJUSTMENT Goals of Chemical Treatment System Type Microscreen filtrate TSS Size of flocs on microscreen Strength of flocs on microscreen Goals First Wave System <15% of Inlet Manure TSS Large Strong Goals Plant System (Second ...

    • 4. Microscreen Setup and Operation

      MICROSCREEN Microscreen Setup Proper setup of the Microscreen involves adjusting two devices to ensure effective draining of solids through the screen surface. These devices are the floc tank adjustment and the screen angle adjustment. FLOC TANK ...

    • 12. General Troubleshooting

      SYMPTOM CAUSE ACTION System won't start ESD Button Pushed Check that all ESD buttons are in their "OUT" position. Press 'RESET' Button Main Feeder Protection Tripped Check feeder protection for blown fuse or tripped circuit breaker. Check wiring for ...

    • 13. GENERAL TROUBLESHOOTING

      SYMPTOM CAUSE ACTION System won't start ESD Button Pushed Check that all ESD buttons are in their "OUT" position. Press 'RESET' Button Main Feeder Protection Tripped Check feeder protection for blown fuse or tripped circuit breaker. Check wiring for ...

    • Appendix B: groControl System

      The grōCONTROL system is designed to enhance the operation of the First Wave system by automating the TSS (Total Suspended Solids) and pH readings of the process liquids at specified time intervals. When grōCONTROL is activated, it will automatically ...