1. TOUCH SCREEN OPERATION
The touch screen operation is the same as First Wave system with more pages for second wave components. The icons are operated in the same way.
It needs to be pointed out that RO autoclean time shall be adjusted as following:
- Pressing and holding the upper right corner of the screen for 3 seconds on the TITLE screen will open the PLC settings screen. An operator can adjust the clock and RO auto cleaning times in 24 hour formats.
Related Articles
1. Touch Screen Operation
TOUCH SCREEN OPERATION The system control panel features an operator display that allows you to control and navigate the system using the touchscreen interface. To operate the touch screen: 1. NAVIGATION: To switch between different screens, press ...
4. Microscreen Setup and Operation
MICROSCREEN Microscreen Setup Proper setup of the Microscreen involves adjusting two devices to ensure effective draining of solids through the screen surface. These devices are the floc tank adjustment and the screen angle adjustment. FLOC TANK ...
5. Screw Press Setup and Operation
SCREW PRESS When operating the screw press, adjustments may be necessary to achieve the desired moisture content in the solids. The moisture content can be controlled by adjusting the pressure at the outlet of the screw press. Here are some ...
6. Floc Tank Setup, Optimization and Operation
FLOCCULATION TANK The flocculation tank plays a crucial role in the treatment process by mixing the injected polymer with the manure before it flows over the Microscreen unit. To ensure effective floc formation while minimizing the use of chemicals, ...
6. REVERSE OSMOSIS (RO)
RO SET UP: The RO system is designed to recover 65-70% of the manure as clean water while concentrating the remaining dissolved solids as a nutrient fertilizer. The RO pressures are set by closing the concentrate valve halfway and allowing the system ...